Syscom UAPPRO Betriebsanweisung PDF herunterladen (Seite 7)

Network Topology Requirements

Hardware Installation

The UniFi AP-Pro can be mounted to the wall or ceiling. Perform

the steps for the appropriate installation:

Wall Mount

1. Position the Mounting Bracket at the desired location on the

wall with the cable feed slot pointed towards the floor.

2. Use a pencil to mark the three holes on the wall. Use a 6 mm

drill bit to drill the holes in the wall.

Top

Optional 25 mm Hole for Ethernet

Cable Feed through Wall

3. (Optional) If your Ethernet cable feeds through the wall, cut or

drill a circle that is approximately 25 mm in size and lines up

with the cable feed slot.

4. Insert the M3x20 Screw Anchors into the 6 mm holes. Secure the

Mounting Bracket to the wall by inserting the M2.9x20 Screws

into the anchors.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Keine Kommentare

Syscom UAPPRO Betriebsanweisung Seite 7